PROCESS MONITORING AND CONTROL SYSTEM (SKUTP-01)
MOBILE (PORTABLE) VERSION
A distinctive feature of the mobile (portable) SKUTP-01 version is a possibility of transportation by any known transport type (including by car) due to its minimum weight and quite compact size as well as a possibility of installation at places of oilfield service operations.
The SKUTP-01 system includes a primary sensor—a Coriolis flowmeter with a density measurement function, which allows you to monitor values of the following parameters of fluid feed into the well:
• density
• flow rate
• pressure
• temperature
The Coriolis flowmeter being a part of the SKUTP-01 mobile package is supplied in a thermal container, which makes it possible to avoid temperature differentials and mechanical impacts during transportation.
Information received from the flowmeter is transmitted to a remote operator workstation via cable connections (reel units).
The values of measured parameters from the flowmeter occur at an external data storage medium (BVI-01, laptop, tablet) and are displayed at a remote display BIV 3-6, which can indicate up to 6 parameters of process solutions injected in the well. Injection results (reports) are generated as graphs and tables reflecting the parameter values throughout the work performance process.
The mobile package's weight is no more than 150 kg.
Flowmeter dimensions are no more than 1710х200х340 mm.
The average time of equipment installation does not exceed 10 minutes.
The warm-up time is no longer than 10 seconds.
Supply voltage requirement is ~220 V or⎓12/24 V.
There is a possibility of data transmission to the customer's remote server via a GPRS signal or a satellite connection, in which case a special version of server software will be supplied and the SKUTP-01 operator's software will be upgraded.
Back
